Code

सार्वजनिक अंतिम एनम कोड

 The canonical error codes for TensorFlow APIs.
 Warnings:
 -   Do not change any numeric assignments.
 -   Changes to this list should only be made if there is a compelling
     need that can't be satisfied in another way.  Such changes
     must be approved by at least two OWNERS.
 -   These error codes must match gRPC and protobuf error codes (except for
     DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_).
 Sometimes multiple error codes may apply.  Services should return
 the most specific error code that applies.  For example, prefer
 OUT_OF_RANGE over FAILED_PRECONDITION if both codes apply.
 Similarly prefer NOT_FOUND or ALREADY_EXISTS over FAILED_PRECONDITION.
प्रोटोबफ एनम tensorflow.error.Code

स्थिरांक

int यहाँ ABORTED_VALUE 
 The operation was aborted, typically due to a concurrency issue
 like sequencer check failures, transaction aborts, etc.
int यहाँ पहले से ही_मौजूद_मान 
 Some entity that we attempted to create (e.g., file or directory)
 already exists.
int यहाँ रद्द_मान 
 The operation was cancelled (typically by the caller).
int यहाँ डेटा_LOSS_VALUE 
 Unrecoverable data loss or corruption.
int यहाँ DEADLINE_EXCEEDED_VALUE 
 Deadline expired before operation could complete.
int यहाँ भविष्य_के_लिए_विस्तार_उपयोग_डिफ़ॉल्ट_IN_SWITCH_INSTEAD__VALUE_नहीं_करें 
 An extra enum entry to prevent people from writing code that
 fails to compile when a new code is added.
int यहाँ FAILED_PRECONDITION_VALUE 
 Operation was rejected because the system is not in a state
 required for the operation's execution.
int यहाँ आंतरिक_मूल्य 
 Internal errors.
int यहाँ INVALID_ARGUMENT_VALUE 
 Client specified an invalid argument.
int यहाँ NOT_FOUND_VALUE 
 Some requested entity (e.g., file or directory) was not found.
int यहाँ ठीक_मान 
 Not an error; returned on success
OK = 0;
int यहाँ OUT_OF_RANGE_VALUE 
 Operation tried to iterate past the valid input range.
int यहाँ PERMISSION_DENIED_VALUE 
 The caller does not have permission to execute the specified
 operation.
int यहाँ RESOURCE_EXHAUSTED_VALUE 
 Some resource has been exhausted, perhaps a per-user quota, or
 perhaps the entire file system is out of space.
int यहाँ अप्रामाणिक_मूल्य 
 The request does not have valid authentication credentials for the
 operation.
int यहाँ अनुपलब्ध_मूल्य 
 The service is currently unavailable.
int यहाँ UNIMPLEMENTED_VALUE 
 Operation is not implemented or not supported/enabled in this service.
int यहाँ अज्ञात_मूल्य 
 Unknown error.

विरासत में मिली विधियाँ

अंतिम पूर्णांक
तुलना करें ( कोड arg0)
int यहाँ
तुलना करें (ऑब्जेक्ट arg0)
अंतिम बूलियन
बराबर (ऑब्जेक्ट arg0)
अंतिम कक्षा < कोड >
getDeclaringClass ()
अंतिम पूर्णांक
हैशकोड ()
अंतिम स्ट्रिंग
नाम ()
अंतिम पूर्णांक
क्रमसूचक ()
डोरी
स्ट्रिंग ()
स्थिर <T Enum<T>> T का विस्तार करता है
valueOf (कक्षा<T> arg0, स्ट्रिंग arg1)
बूलियन
बराबर (ऑब्जेक्ट arg0)
अंतिम कक्षा<?>
गेटक्लास ()
int यहाँ
हैशकोड ()
अंतिम शून्य
सूचित करें ()
अंतिम शून्य
सभी को सूचित करें ()
डोरी
स्ट्रिंग ()
अंतिम शून्य
प्रतीक्षा करें (लंबा arg0, int arg1)
अंतिम शून्य
प्रतीक्षा करें (लंबा arg0)
अंतिम शून्य
इंतज़ार ()
सार इंट
तुलना करें ( कोड arg0)

एनम मान

सार्वजनिक स्थैतिक अंतिम कोड निरस्त किया गया

 The operation was aborted, typically due to a concurrency issue
 like sequencer check failures, transaction aborts, etc.
 See litmus test above for deciding between FAILED_PRECONDITION,
 ABORTED, and UNAVAILABLE.
ABORTED = 10;

सार्वजनिक स्थैतिक अंतिम कोड ALREADY_EXISTS

 Some entity that we attempted to create (e.g., file or directory)
 already exists.
ALREADY_EXISTS = 6;

सार्वजनिक स्थैतिक अंतिम कोड रद्द किया गया

 The operation was cancelled (typically by the caller).
CANCELLED = 1;

सार्वजनिक स्थैतिक अंतिम कोड DATA_LOSS

 Unrecoverable data loss or corruption.
DATA_LOSS = 15;

सार्वजनिक स्थैतिक अंतिम कोड DEADLINE_EXCEEDED

 Deadline expired before operation could complete.  For operations
 that change the state of the system, this error may be returned
 even if the operation has completed successfully.  For example, a
 successful response from a server could have been delayed long
 enough for the deadline to expire.
DEADLINE_EXCEEDED = 4;

सार्वजनिक स्थैतिक अंतिम कोड DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_

 An extra enum entry to prevent people from writing code that
 fails to compile when a new code is added.
 Nobody should ever reference this enumeration entry. In particular,
 if you write C++ code that switches on this enumeration, add a default:
 case instead of a case that mentions this enumeration entry.
 Nobody should rely on the value (currently 20) listed here.  It
 may change in the future.
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_ = 20;

सार्वजनिक स्थैतिक अंतिम कोड FAILED_PRECONDITION

 Operation was rejected because the system is not in a state
 required for the operation's execution.  For example, directory
 to be deleted may be non-empty, an rmdir operation is applied to
 a non-directory, etc.
 A litmus test that may help a service implementor in deciding
 between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE:
  (a) Use UNAVAILABLE if the client can retry just the failing call.
  (b) Use ABORTED if the client should retry at a higher-level
      (e.g., restarting a read-modify-write sequence).
  (c) Use FAILED_PRECONDITION if the client should not retry until
      the system state has been explicitly fixed.  E.g., if an "rmdir"
      fails because the directory is non-empty, FAILED_PRECONDITION
      should be returned since the client should not retry unless
      they have first fixed up the directory by deleting files from it.
  (d) Use FAILED_PRECONDITION if the client performs conditional
      REST Get/Update/Delete on a resource and the resource on the
      server does not match the condition. E.g., conflicting
      read-modify-write on the same resource.
FAILED_PRECONDITION = 9;

सार्वजनिक स्थैतिक अंतिम कोड आंतरिक

 Internal errors.  Means some invariant expected by the underlying
 system has been broken.  If you see one of these errors,
 something is very broken.
INTERNAL = 13;

सार्वजनिक स्थैतिक अंतिम कोड INVALID_ARGUMENT

 Client specified an invalid argument.  Note that this differs
 from FAILED_PRECONDITION.  INVALID_ARGUMENT indicates arguments
 that are problematic regardless of the state of the system
 (e.g., a malformed file name).
INVALID_ARGUMENT = 3;

सार्वजनिक स्थैतिक अंतिम कोड NOT_FOUND

 Some requested entity (e.g., file or directory) was not found.
 For privacy reasons, this code *may* be returned when the client
 does not have the access right to the entity.
NOT_FOUND = 5;

सार्वजनिक स्थैतिक अंतिम कोड ठीक है

 Not an error; returned on success
OK = 0;

सार्वजनिक स्थैतिक अंतिम कोड OUT_OF_RANGE

 Operation tried to iterate past the valid input range.  E.g., seeking or
 reading past end of file.
 Unlike INVALID_ARGUMENT, this error indicates a problem that may
 be fixed if the system state changes. For example, a 32-bit file
 system will generate INVALID_ARGUMENT if asked to read at an
 offset that is not in the range [0,2^32-1], but it will generate
 OUT_OF_RANGE if asked to read from an offset past the current
 file size.
 There is a fair bit of overlap between FAILED_PRECONDITION and
 OUT_OF_RANGE.  We recommend using OUT_OF_RANGE (the more specific
 error) when it applies so that callers who are iterating through
 a space can easily look for an OUT_OF_RANGE error to detect when
 they are done.
OUT_OF_RANGE = 11;

सार्वजनिक स्थैतिक अंतिम कोड PERMISSION_DENIED

 The caller does not have permission to execute the specified
 operation.  PERMISSION_DENIED must not be used for rejections
 caused by exhausting some resource (use RESOURCE_EXHAUSTED
 instead for those errors).  PERMISSION_DENIED must not be
 used if the caller can not be identified (use UNAUTHENTICATED
 instead for those errors).
PERMISSION_DENIED = 7;

सार्वजनिक स्थैतिक अंतिम कोड RESOURCE_EXHAUSTED

 Some resource has been exhausted, perhaps a per-user quota, or
 perhaps the entire file system is out of space.
RESOURCE_EXHAUSTED = 8;

सार्वजनिक स्थैतिक अंतिम कोड अप्रमाणित

 The request does not have valid authentication credentials for the
 operation.
UNAUTHENTICATED = 16;

सार्वजनिक स्थैतिक अंतिम कोड अनुपलब्ध

 The service is currently unavailable.  This is a most likely a
 transient condition and may be corrected by retrying with
 a backoff.
 See litmus test above for deciding between FAILED_PRECONDITION,
 ABORTED, and UNAVAILABLE.
UNAVAILABLE = 14;

सार्वजनिक स्थैतिक अंतिम कोड लागू नहीं किया गया

 Operation is not implemented or not supported/enabled in this service.
UNIMPLEMENTED = 12;

सार्वजनिक स्थैतिक अंतिम कोड अज्ञात

 Unknown error.  An example of where this error may be returned is
 if a Status value received from another address space belongs to
 an error-space that is not known in this address space.  Also
 errors raised by APIs that do not return enough error information
 may be converted to this error.
UNKNOWN = 2;

सार्वजनिक स्थैतिक अंतिम कोड अपरिचित

स्थिरांक

सार्वजनिक स्थैतिक अंतिम पूर्णांक ABORTED_VALUE

 The operation was aborted, typically due to a concurrency issue
 like sequencer check failures, transaction aborts, etc.
 See litmus test above for deciding between FAILED_PRECONDITION,
 ABORTED, and UNAVAILABLE.
ABORTED = 10;

स्थिर मान: 10

सार्वजनिक स्थैतिक अंतिम पूर्णांक ALREADY_EXISTS_VALUE

 Some entity that we attempted to create (e.g., file or directory)
 already exists.
ALREADY_EXISTS = 6;

स्थिर मान: 6

सार्वजनिक स्थैतिक अंतिम पूर्णांक CANCELLED_VALUE

 The operation was cancelled (typically by the caller).
CANCELLED = 1;

स्थिर मान: 1

सार्वजनिक स्थैतिक अंतिम पूर्णांक DATA_LOSS_VALUE

 Unrecoverable data loss or corruption.
DATA_LOSS = 15;

स्थिर मान: 15

सार्वजनिक स्थैतिक अंतिम पूर्णांक DEADLINE_EXCEEDED_VALUE

 Deadline expired before operation could complete.  For operations
 that change the state of the system, this error may be returned
 even if the operation has completed successfully.  For example, a
 successful response from a server could have been delayed long
 enough for the deadline to expire.
DEADLINE_EXCEEDED = 4;

स्थिर मान: 4

सार्वजनिक स्थैतिक अंतिम पूर्णांक DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD__VALUE

 An extra enum entry to prevent people from writing code that
 fails to compile when a new code is added.
 Nobody should ever reference this enumeration entry. In particular,
 if you write C++ code that switches on this enumeration, add a default:
 case instead of a case that mentions this enumeration entry.
 Nobody should rely on the value (currently 20) listed here.  It
 may change in the future.
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_ = 20;

स्थिर मान: 20

सार्वजनिक स्थैतिक अंतिम पूर्णांक FAILED_PRECONDITION_VALUE

 Operation was rejected because the system is not in a state
 required for the operation's execution.  For example, directory
 to be deleted may be non-empty, an rmdir operation is applied to
 a non-directory, etc.
 A litmus test that may help a service implementor in deciding
 between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE:
  (a) Use UNAVAILABLE if the client can retry just the failing call.
  (b) Use ABORTED if the client should retry at a higher-level
      (e.g., restarting a read-modify-write sequence).
  (c) Use FAILED_PRECONDITION if the client should not retry until
      the system state has been explicitly fixed.  E.g., if an "rmdir"
      fails because the directory is non-empty, FAILED_PRECONDITION
      should be returned since the client should not retry unless
      they have first fixed up the directory by deleting files from it.
  (d) Use FAILED_PRECONDITION if the client performs conditional
      REST Get/Update/Delete on a resource and the resource on the
      server does not match the condition. E.g., conflicting
      read-modify-write on the same resource.
FAILED_PRECONDITION = 9;

स्थिर मान: 9

सार्वजनिक स्थैतिक अंतिम पूर्णांक INTERNAL_VALUE

 Internal errors.  Means some invariant expected by the underlying
 system has been broken.  If you see one of these errors,
 something is very broken.
INTERNAL = 13;

स्थिर मान: 13

सार्वजनिक स्थैतिक अंतिम पूर्णांक INVALID_ARGUMENT_VALUE

 Client specified an invalid argument.  Note that this differs
 from FAILED_PRECONDITION.  INVALID_ARGUMENT indicates arguments
 that are problematic regardless of the state of the system
 (e.g., a malformed file name).
INVALID_ARGUMENT = 3;

स्थिर मान: 3

सार्वजनिक स्थैतिक अंतिम पूर्णांक NOT_FOUND_VALUE

 Some requested entity (e.g., file or directory) was not found.
 For privacy reasons, this code *may* be returned when the client
 does not have the access right to the entity.
NOT_FOUND = 5;

स्थिर मान: 5

सार्वजनिक स्थैतिक अंतिम पूर्णांक OK_VALUE

 Not an error; returned on success
OK = 0;

स्थिर मान: 0

सार्वजनिक स्थैतिक अंतिम पूर्णांक OUT_OF_RANGE_VALUE

 Operation tried to iterate past the valid input range.  E.g., seeking or
 reading past end of file.
 Unlike INVALID_ARGUMENT, this error indicates a problem that may
 be fixed if the system state changes. For example, a 32-bit file
 system will generate INVALID_ARGUMENT if asked to read at an
 offset that is not in the range [0,2^32-1], but it will generate
 OUT_OF_RANGE if asked to read from an offset past the current
 file size.
 There is a fair bit of overlap between FAILED_PRECONDITION and
 OUT_OF_RANGE.  We recommend using OUT_OF_RANGE (the more specific
 error) when it applies so that callers who are iterating through
 a space can easily look for an OUT_OF_RANGE error to detect when
 they are done.
OUT_OF_RANGE = 11;

स्थिर मान: 11

सार्वजनिक स्थैतिक अंतिम पूर्णांक PERMISSION_DENIED_VALUE

 The caller does not have permission to execute the specified
 operation.  PERMISSION_DENIED must not be used for rejections
 caused by exhausting some resource (use RESOURCE_EXHAUSTED
 instead for those errors).  PERMISSION_DENIED must not be
 used if the caller can not be identified (use UNAUTHENTICATED
 instead for those errors).
PERMISSION_DENIED = 7;

स्थिर मान: 7

सार्वजनिक स्थैतिक अंतिम int RESOURCE_EXHAUSTED_VALUE

 Some resource has been exhausted, perhaps a per-user quota, or
 perhaps the entire file system is out of space.
RESOURCE_EXHAUSTED = 8;

स्थिर मान: 8

सार्वजनिक स्थैतिक अंतिम पूर्णांक UNAUTHENTICATED_VALUE

 The request does not have valid authentication credentials for the
 operation.
UNAUTHENTICATED = 16;

स्थिर मान: 16

सार्वजनिक स्थैतिक अंतिम पूर्णांक UNAVAILABLE_VALUE

 The service is currently unavailable.  This is a most likely a
 transient condition and may be corrected by retrying with
 a backoff.
 See litmus test above for deciding between FAILED_PRECONDITION,
 ABORTED, and UNAVAILABLE.
UNAVAILABLE = 14;

स्थिर मान: 14

सार्वजनिक स्थैतिक अंतिम पूर्णांक UNIMPLEMENTED_VALUE

 Operation is not implemented or not supported/enabled in this service.
UNIMPLEMENTED = 12;

स्थिर मान: 12

सार्वजनिक स्थैतिक अंतिम पूर्णांक UNKNOWN_VALUE

 Unknown error.  An example of where this error may be returned is
 if a Status value received from another address space belongs to
 an error-space that is not known in this address space.  Also
 errors raised by APIs that do not return enough error information
 may be converted to this error.
UNKNOWN = 2;

स्थिर मान: 2